WELDED BLOCK PLATE HEAT EXCHANGERSProcess heating · Cooling · Condensation · Heat recovery
APPLICATION ENGINEERING GUIDE

Welded Plate Reboiler & Evaporator Selection

Assess a welded plate reboiler or evaporator together with the circulation system. Define boiling pressure, composition, vapour generation and heating-medium conditions, then check driving head and system pressure losses.

Process Role

A reboiler supplies heat for vapour generation, while an evaporator is selected around the required evaporation duty. The supplied gas-sweetening process diagram includes a stripper reboiler. The amine-production reference lists reboiling and evaporation among several plant duties, but publishes no single-unit operating data.

Typical Thermal Duties and Process Boundaries

In gas sweetening, the stripper reboiler supplies heat to regeneration, while the overhead condenser removes heat from the outgoing vapour. The lean/rich exchanger handles heat recovery between solvent streams. These are separate heat balances and hydraulic circuits.

For an amine-production or ammonia-process enquiry, identify which stream is boiled or evaporated and what vapour generation is required. A condensation/subcooling reference cannot supply missing reboiler performance figures.

Amine gas treatingRich amine flows from absorber through the lean/rich exchanger to the stripper. Lean amine returns through the exchanger and lean cooler to the absorber. The stripper has an overhead condenser and reboiler. Utility circuits and ancillary equipment are omitted.Amine gas treating · heat exchange positionsAbsorberStripperBLOCHEAT EXCHANGERLean coolerBLOCHEAT EXCHANGERLean / rich exchangerBLOCHEAT EXCHANGERReboilerBLOCHEAT EXCHANGERCondenserSour gasSweet gasRich amineLean amineOverheadhandlingRich amine / process vapourLean amine / gas path
Amine gas treating · Conceptual flow. Blue equipment: BLOC HEAT EXCHANGER. Separate fluid circuits; not a project P&ID.

Key Engineering Inputs

Provide process composition and phase-property data, boiling pressure, the corresponding saturation or boiling-temperature basis, feed conditions, required vapour generation and outlet requirements. For mixtures, supply the relevant boiling behaviour rather than assuming a single pure-fluid saturation temperature.

Specify heat-source temperature, available flow and operating range. State pressures and allowable losses separately for both circuits. Include circulation arrangement, elevations, liquid levels, pipe sizes and the pressure losses of the full loop where relevant.

Circulation, Static Head and Thermosiphon Feasibility

Where natural circulation or thermosiphon operation is proposed, assess whether the available circulation driving head can support the exchanger and system pressure losses. Review the exchanger together with the connecting piping and column, not as an isolated heat-transfer surface.

The supplied references do not establish a universal thermosiphon capability. A proposal needs a defined circulation basis for the actual fluid, heat input and installation. Identify any pump or other circulation arrangement from project documents rather than inventing one from a generic diagram.

Startup, Turndown and Fouling

Define startup heat supply, inventory and circulation requirements, then assess stable vapour generation across the intended turndown range. Changing feed composition or heating conditions can change the selection basis. Include expected deposits and a documented cleaning method.

Identify drainage or venting requirements where relevant to the process and heating-medium circuit. Review access, panel seals and the maintenance envelope. No heat duty, temperature, flow or pressure values are inferred from the generic gas-sweetening or amine-plant references.

Selection Considerations

Distinguish the thermal requirement from the circulation-system requirement. Confirm compatible plate materials and seals, available heating conditions and the project operating/design envelope before agreeing the exchanger configuration. The examples support application context, not numerical capacity or energy-saving guarantees.

What PANSTAR Needs for Selection

Send the process and heating-medium duty sheets, fluid/phase properties, required vapour generation, separate operating/design conditions, allowable pressure drops and normal/startup/turndown cases. Include a circulation-system sketch with elevations and piping-loss information, material requirements, fouling history and installation clearances.

Engineering background: Gas-sweetening process context, p. 39; Published amine-production duty list. The examples describe published third-party equipment, not PANSTAR installations.

Send Your Process Data for Heat Exchanger Selection

Provide both fluids, flow rates, inlet and outlet temperatures, operating and design pressures, allowable pressure drop and material requirements. For a replacement, include the nameplate and arrangement drawing.

Send Your Process Data